标签： bi shot mold

mold construction design for core toggle multi shot molding

Leave a comment

We have discussed the rotary table multi shot mold and rotary shaft multi shot mold before, so today we will talk about the two-color injection of the core toggle mold!

The core toggle multi shot molding process is the easiest, because the core and cavity of the mold do not need to be moved. Conversely, changing the geometry of the mold cavity by moving the slider. Check below pictures:

First inject material A into the cavity, at the same time the slider is in the fully extended position!

Then retracting the slider to reveal a new portion of the cavity！

After that, material B is injected into the reconfigured cavity through a separate gate (above the middle nozzle), the remaining gap is filled by moving the slider！

Then the plastic part hardens and ejected from the mold. Sequentially circulated as the above to continue the molding!

Adding a slider to the mold adds the cost of the tool, but it still can be much more cheaper than rotating platen or rotary shaft mold. Unfortunately, it can not produce the complex multi colored plastic parts.

We YUEYI Mold, China top multi injection mold maker, always here ready to service you, if you’re still looking for the good multi shot mold maker in China!

Lucia

lucia@yueyimold.com

mold construction design for rotary platen multi shot molding

Leave a comment

In the past, a multi materials part was done by using additional secondary services or more complex assemblies. However, today’s multi materials injection molding largely eliminates these additional requirements, making it much more easier to manufacture complex finished parts, faster and cheaper.

According to moving different molded parts can be divided into:

1.      Rotary platen multi shot molding

2.      Rotary shaft multi shot molding

3.      Core toggle multi shot molding

Rotary Platen Multi Shot Molding

The mold core plate contains two identical cores that are mirrored on the centerline of the platen and coincide with the axis of rotation. The cavity plate connected to the fixed platen contains two cavities with different geometries. In each cycle, the rotary platen completes the switching of the molded parts, and eliminates the need for manual switching.

Check below video for better understanding!

Here we only show the two materials mold, which can actually accommodate more materials. The rotary platen can be rotated by 90°, 120° or 180° depending on the amount of material used. Also it will need a special injection machine to provide the required rotation on the core side.

And on my next blogs, I’ll share you my understanding of mold construction design for Rotary shaft multi shot molding & Core toggle multi shot molding!

Hope it will help you for your multi materials molding !

Lucia

lucia@yueyimold.com

two color basket rattan design

Leave a comment

此幻灯片需要JavaScript支持。

YUEYI Mold, China top dual colour mold maker, offer two color basket in rattan design, plastic rattan basket injection mold 2k, double shot storage basket mould rattan!

As we all know, hot runner system is very important for the injection molds, as it will directly influence the raw material balance injecting, thus to have the good full filled plastic parts!

YUEYI provides freedom of design to geometrically balance melt flow to each cavity

  • Overall fill balance is optimized
  • Sharp corners and “dead spots” are eliminated
  • Channel end plugs are eliminated, no risk of leakage
  • Improved cavity-to-cavity weight variation
  • Fast color change over time

We YUEYI pay attention to the more details, to have the multi shot mold durable!

If you’re still looking for the good bi material mold maker in China, then we can be your another good choice!

Lucia

lucia@yueyimold.com

2K safety helmet mold supply

Leave a comment

China 2K molds maker, YUEYI Mold quality offer two color safety helmet mold,  hard hat bi injection, bi color mold safety cap, 2K mould safety hat, double colour bump caps, two shot protecting cap, protective cap in two color molding designs.

Pls feel free to contact for more details of 2K mold design, 2K injection molding, we YUEYI is ready to offer you the Turnkey two color moulding solution: from product design, mold design, quality mold making, supply the most suitable two color molding machine to meet your 2K molding! Also supply the training services in your factory to help your workers better molded!

Welcome your new inquiry!

Lucia

lucia@yueyimold.com

two color molding service supply

Leave a comment

YUEYI Mold, being the top rank China two color mold maker, quality offer bi component molds, tri material plastic injection molds. Also we’re equipped with different types two color molding machines, to meet customers’ different double colour molds, also to offer two color moulding services!

  • Table rotary two color machine

此幻灯片需要JavaScript支持。

We have Fu Chun Shin FCS280T table rotary two color machine, and it is ok to molding almost all below two shot plastic housewares, for example plastic injection mold multiple bowls, mugs, dinner plate, etc.

 

此幻灯片需要JavaScript支持。

We have Beston 350T axis rotary two color machine, and it is ok to molding bi component toothbrushes, shaver, manual tools, etc.

 

  • Normal injection machine with an external injection unit

此幻灯片需要JavaScript支持。

Sometimes customer find to buy a two color injection machine is very expensive, then you may choose this external injection unit, to equip with your normal standard machines! Without this unit, you can also molding single color parts! And it is ok to molding for example the double colour top flip caps!

 

  • Overmould injection machine 

As overmolding will need two molds, after you get the first color part from the first mold, then you need to manual put this first color part into the second mold, to have it double colored! So it will need the standard machines! And we have two sets Haitian 250T machine to meet your molding requirement!

 

multi shot pitcher mold
2k pitcher mold

Pls feel free to contact to custom your quality bi component molds! And we’ll help to figure out which is the best molding way for your two colored product!

Lucia

lucia@yueyimold.com