Raw materials, tolerances, and component assembly are all elements that can affect the manufacturability of a part. Potential problems are fixed in the design phase of a project, the least expensive place to address any issues – saving our customers time and money.
YUEYI works continuously to create value for our customers through the adaptation of Lean Production Processes. Lean production is a rigorously controlled program that seeks to maximize customer value while minimizing waste.
If you’re still looking for the good twin material mold maker in China, we can be your another good choice!
One is by overmolding, it will needs two molds injection, run by the normal single color injection machine.
Second is two color mold + shaft rotary two color machine
While the third is two color brush in mold rotary + normal two color machine.
As we all know the first one, so here let’s talk about the second & third ones!
If we go ahead with the second, then it needs the machine should be equipped with the shaft rotary structure! At the same time, needs double injection nozzles! Check below pics:
此幻灯片需要JavaScript支持。
But the two color mold will be relatively easier than the third way! As by the third, will need the toothbrush in mold rotary, i.e. no need the machine have the shaft rotary structure (but sure needs double injection nozzles), it will complete the rotary in the mold.
Above all, by the second, the two color mold will be easier, but the machine is more complex; while by the third, the mold is much more complex, but the machine easier!!!
If you’re still looking for the good toothbrush mold maker in China, we can be your another good choice. We’ll do the custom based on your factory manufacturing situation!
As we all know, if you prefer to have the toothbrush mold automatic running, then must the injection machine itself equipped with the shaft rotating structure, or shaft rotation in the mold!!! Compared these two, suggest to have the former one, as by this way, the mold construction design will be much more easier also the brush mold cost will be cheaper than the latter. For example, 4+4cav adult toothbrush mold cost is USD28,000, while USD33,500 for the shaft rotation in the mold! But if your two color machine even has no ejector in the center to eject the axis rotary in the mold, then the cost may be over 50% higher than USD28,000.
Or otherwise, over molding will be your best solution, with automation robot system or manual hand to pick the first colored part and then put it into the second mold to have it double colored!
Pls do not hesitate to contact me for yourtoothbrush mold custom!
