标签： stacking mold

10+10cav plastic hanger stacking mold

Leave a comment

YUEYI Mold, China experienced stack mold maker, quality offer coat hanger stacking mold, clothes stand hamburger mold, drying rack double deck mold, plastic maker of laundry rack multiple molding. 

Stack molds double (or more for increased stack mold levels) the output of standard plastic injection molds, increasing molding efficiency and reducing the overall part cost. Stack molds can also produce multi-component assemblies or a family of parts in one shot on one plastic injection molding machine.

Most stack molds have an equal number of the same cavities in each side of the mold, or parting surface, but they can also have different cavities in each mold parting surface to produce a family of parts per shot, with each part being a different shape and size.

If you’re still looking for the good multiple layer cloth rack stack mold maker in China, we can be your another good choice.

Lucia

lucia@yueyimold.com

plastic spork stack mold

Leave a comment

 

stack spoon mold china maker
stack spoon mold

YUEYI Mold, China precision mold maker, quatity offer plastic cutlery stack mold, disposable spork knife hamburger mold, plastic fork stacking mold, folding spoon in mold closing

Stack Molds are a series of molding faces “stacked” together to create multiple faces or levels for molding. Each level or face is a parting line and produces molded product.

The benefit of stack molding is to increase the output of a given molding machine and operation. In many cases, parts with a large projected area can be converted or built in a stack mold configuration, doubling the output of a given machine.

Special machine considerations are required to run stack molds, however YUEYI’s technical team are well versed in providing guidelines and recommendations to ensure success when adopting a stack mold strategy.

YUEYI provides stack molds in 2, 3 and 4 level configurations based on part designs and volume requirements.

Lucia

lucia@yueyimold.com

hamburger mold laundry rack

Leave a comment

YUEYI Mold, China hanger mold maker, quality offer stack mold clothe hanger, clothe rack hamburger mold, 2 component coat hanger mold, multi shot laundry rack mold, plastic hanger!

Clothes hanger molds make use of high volume stack mold technology, to dramatically increase the productivity of a molding cell. For standard injection molding machines, YUEYI can provide complete stack mold solutions, that include proper support of the mold center section from the machine clamp frame, as well as incorporating centering devices and fully balanced hot runner solutions, that enable consistent production from all cavities in the mold.

One of YUEYI’s value added capabilities is melt flow analysis which plays an important role when it comes to ensuring proper filling of certain parts such as clothes hangers.

We YUEYI also custom you two color drying rack mold with quality and delivery!

If you’re still looking for the good plastic hanger stack mold or tpe laundry rack 2k mold maker in China, I’m sure we can be your another good choice!

Lucia

lucia@yueyimold.com

China stack turning mold supply

China stack turning mold maker

The advantage of the cube technology over other mold technologies is that the number of cavities for the same machine size can be doubled. Or in other words: for the same production lot, the size of the machine is almost halved.

In the stack turning technology, the mold rotation is performed with a horizontal rotary device in the form of a center plate. Plastic parts are produced in the first parting plane. When the mold is opened, they remain on the side of the moving center plate. For a fully opened mold, the center plate is rotated 180° and placed in the second parting plane. After closing again, the second component is injected in the second cavity where the parts are located on the center block.

When using stack-turning molds with 4 × 90° rotation, stations 2 (operator side) and 4 (non-operator side) can be simultaneously used for further production steps.

For example, station 2 can be used for cooling the molded parts and station 4 can be used for removal by a robotic system. Both functions take place without affecting the cycle time. Alternatively, station 2 can also be used for mounting (in-mold assembly) inside and outside the system.

Anyway, if you’re looking for the good multi material stack turning mold maker in China, then I’m sure we can be your another good choice!

Lucia

lucia@yueyimold.com

edible oil bottle cap mold

Leave a comment

此幻灯片需要JavaScript支持。

YUEYI Mold, China top precision mold maker, quality offer edible oil cap mold, plastic CTC bottle closure mold, single piece edible closure mold, PET bottle oil cap injection mold !

With a specialisation in closure moulds with collapsing cores, in-mold closing, and co injection molding, we YUEYI can reel off a list of industry firsts in which it was involved.

Making molds run faster and focusing cooling are just two areas that YUEYI are innovating in order to improve the manufacturing process.

We focus more on the mold design and are good collaborators. It’s never just about a mold, even if we are a mold maker. we offered not just the mold, but full Turnkey systems in addition to part design!

Lucia

lucia@yueyimold.com