标签： stack molding

10+10cav plastic hanger stacking mold

Leave a comment

YUEYI Mold, China experienced stack mold maker, quality offer coat hanger stacking mold, clothes stand hamburger mold, drying rack double deck mold, plastic maker of laundry rack multiple molding. 

Stack molds double (or more for increased stack mold levels) the output of standard plastic injection molds, increasing molding efficiency and reducing the overall part cost. Stack molds can also produce multi-component assemblies or a family of parts in one shot on one plastic injection molding machine.

Most stack molds have an equal number of the same cavities in each side of the mold, or parting surface, but they can also have different cavities in each mold parting surface to produce a family of parts per shot, with each part being a different shape and size.

If you’re still looking for the good multiple layer cloth rack stack mold maker in China, we can be your another good choice.

Lucia

lucia@yueyimold.com

China stack turning mold supply

China stack turning mold maker

The advantage of the cube technology over other mold technologies is that the number of cavities for the same machine size can be doubled. Or in other words: for the same production lot, the size of the machine is almost halved.

In the stack turning technology, the mold rotation is performed with a horizontal rotary device in the form of a center plate. Plastic parts are produced in the first parting plane. When the mold is opened, they remain on the side of the moving center plate. For a fully opened mold, the center plate is rotated 180° and placed in the second parting plane. After closing again, the second component is injected in the second cavity where the parts are located on the center block.

When using stack-turning molds with 4 × 90° rotation, stations 2 (operator side) and 4 (non-operator side) can be simultaneously used for further production steps.

For example, station 2 can be used for cooling the molded parts and station 4 can be used for removal by a robotic system. Both functions take place without affecting the cycle time. Alternatively, station 2 can also be used for mounting (in-mold assembly) inside and outside the system.

Anyway, if you’re looking for the good multi material stack turning mold maker in China, then I’m sure we can be your another good choice!

Lucia

lucia@yueyimold.com

edible oil bottle cap mold

Leave a comment

此幻灯片需要JavaScript支持。

YUEYI Mold, China top precision mold maker, quality offer edible oil cap mold, plastic CTC bottle closure mold, single piece edible closure mold, PET bottle oil cap injection mold !

With a specialisation in closure moulds with collapsing cores, in-mold closing, and co injection molding, we YUEYI can reel off a list of industry firsts in which it was involved.

Making molds run faster and focusing cooling are just two areas that YUEYI are innovating in order to improve the manufacturing process.

We focus more on the mold design and are good collaborators. It’s never just about a mold, even if we are a mold maker. we offered not just the mold, but full Turnkey systems in addition to part design!

Lucia

lucia@yueyimold.com

double deck injection mold 2k

Leave a comment

co injection stack mold China supply

YUEYI Mold, China top co injection mold maker, quality offer two color stack mold, multi shot stack molding, double-deck injection mold 2k, plastic double multiple mold!

Thanks to the previous failure experience, now we’re very familiar with the production of stack molds.

And stack mold technology allows for the creation of the right plastics solution, using it in combination with any other applicable technologies that are part of Focare’s offerings:

Two color stack molds to increase productivity of each injection molding machine
Two color stack mold designs have evolved to successfully fill the needs of a wide variety of injection molding plastic applications. As the need for high production volumes are climbing, there may never have been a better time to review the present-day features and capabilities of stack mold technology.

If you’re still looking for the multi shot stack mold maker in China, we Focare can be your only choice!

Lucia

lucia@yueyimold.com

co injection stack mold supply

Leave a comment

co injection stack mold China supply

Co injection molds is widely used in food and medical packaging, and we YUEYI provides co injection tooling based on innovated technology and systems – CO INJECTION STACK MOLD supply!

Co-injection stack mold can effectively solve the low output of customers’ two-color molded parts, greatly increase the production and reduce the consumption costs!

While compared to the single layer two color mold, the clamping force of co-injection stack mold will be 1.2-1.5 times! And the molding cycle time will be very similar, but the output efficiency is more than 1.8 times!

So what should be paid attention while doing the co-injection stack mold??

  • co injection stack molding with robotic transfer or the mold core part rotary is ok!
  • The mold requires high machining accuracy and high concentricity
  • The mold construction design must consider a reasonable and dedicated mold base system, hot runner system, load guidance system, two-way ejection system, linkage secondary molding system, etc.

We YUEYI team has accumulated over ten years of R & D and manufacturing experience in multi material molding technology. Foreseeably design and correct defects for various two-color parts, and support customers with the mature bi material molding technologies!!

If you’re troubled with the low output of your current 2k molding, if you’re still looking for the good 2k mold maker in China, then we can be your another good choice!

Lucia

lucia@yueyimold.com