YUEYI Mold, China experienced 2k mold maker, quality offer bi shot barometric damper mold, dual component sidedraft damper mold, double material side vent flaps mold, double color windshield heater flaps mold.
Injection mold in production, need regular maintenance, primary maintenance are as follow:
– During the production process, wipe with a cloth every 8 hours on the parting surface both core and cavity side. But attention not to wipe mirror polished or textured core to avoid scratch.
– During production process need to give guide pin, slider or sliding parts coated with lubricant once a day, play a ejector pin oil, to prevent wear damage or stuck.
– Each shift should check whether the slider and ejector pin moves abnormal, spring is broken?
– If found any problem should immediately stop production.
– When found the product stick to cavity or core, should immediately stop production and don’t use diagonal pliers to take out the product.
– If production stops, regardless of short time stop, required to immediately turn off the chilled water to prevent mold rust.
– When take off the mold from the IMM, must ensure no water left in the cooling line and mold. Wipe clean the parting surface and check whether there is mold damage.
If you’re still looking for the good bi mold replacement damper maker in China, we can be your another good choice.
Lucia
lucia@yueyimold.com