two color water stop mold

YUEYI Mold, China experienced gyratory mold maker, quality offer two color water stop mold, multi shot hose connector mold, 2 component quick connector mold, bi material repair connector mold. 

YUEYI is a professional multi component mold making factory in China.

Having worked with a variety of clients within this specialist market sector for many years. We have assisted our clients to design and develop new and exciting plastic injection moulded products specifically for the double color sectors. We are proud that we are not only a mould maker to our clients, but also an important solution provider!

We treasure every opportunity to serve with you, our valued friend and customer.

If you’re still looking for the good double repair joint irrigation mold maker in China, we can be your another good choice.

Lucia

lucia@yueyimold.com

two shot plastic tumbler glass mold

two shot plastic tumbler glass mold

YUEYI Mold, China experienced 2 component mold maker, quality offer two shot plastic tumbler glass mold, bi injection smoothie cups mold, multi colour drinking glass mold, gyratory acrylic travel cups mold. 

As a professional and experienced plastic mould manufacturing factory, we YUEYI are specialized in making multi component molds. Our core competence is optimal mould design and on-time delivery.

About design: Our Spain client once told us excitedly ” The mold cooling is amazingly designed, very efficient! Our Pakistan client says ” I know your mould structure, always I no need to check design. You can start mould tooling once after design finished”

About delivery: Our Russian client always say to us “You are our first mold supplier that deliver ahead of schedule”

If you’re still looking for the good plastic mug bi mold maker in China, we can be your another good choice.

Lucia

lucia@yueyimold.com

multi shot air conditioner deflector mold

multi shot air conditioner deflector mold

YUEYI Mold, China experienced 2k mold maker, quality offer multi shot air conditioner deflector mold, 2 component air vent deflector mold, pp tpe heater damper 2k mold, double colour AC temperature partition flap mold. 

What’s the main tips to make an optimal mould design?

Wall thickness
1. All kinds of plastic have a certain wall thickness range, generally is 0.5-4mm, when the wall thickness is more than 4mm, will cause too long cooling time, resulting in product furface shrink mark, then should consider changing the product structure.
2. Uneven wall thickness will cause the surface to shrink, and joint mark.

Strengthen rib
1. The rational application of the ribs can increase the rigidity of the product and reduce the deformation.
2. The thickness of strengthen rib must be ≤ (0.5 ~ 0.7) t product wall thickness, otherwise the surface shrinks.

If you’re still looking for the good bi material ac flap mold maker in China, we can be your another good choice.

Lucia

lucia@yueyimold.com

gyratory garbage shovel mold

YUEYI Mold, China experienced bi mold maker, quality offer multi shot small trash can mold, gyratory garbage shovel mold, 2 component dust collector mold, two tone plastic dustpan mold. 

What’s the main tips to make an optimal mold design?

Draft angle
1. Appropriate draft angle can avoid scratch on product. Product with glossy surface, draft angle should be ≥0.5°. Product with thin texture, draft angle should >1° and thick texture surface product draft angle should>1.5°

2. Appropriate draft angle can avoid ejector mark, deform and break by eject

3. For deep cavity structure product, the outer surface angle should be greater than inner surface to ensure the mould core is not offset, get a uniform wall thickness, and to ensure the product opening strength.

If you’re still looking for the good two colour dust catcher mold maker in China, we can be your another good choice.

Lucia

lucia@yueyimold.com

two colour plastic beauty jar cap mold

multi injection cosmetic pot lid

YUEYI Mold, China experienced multi component mold maker, quality offer bi mold cream jars lid, two colour plastic beauty jar cap mold, turntable cosmetic container cover mold, multi injection cosmetic pot lid. 

what’s the main tips to make an optimal mold design?

1. After the mould open direction determined, the product strengthen ribs, locks and other structures should designed and consistent with mould open direction.

2. Mould open direction determined, then to choose the appropriate parting line, to avoid undercut and improve the product appearance and performance.

As a professional and experienced plastic mold manufacturing factory, we YUEYI are specialized in making multi component molds. Our core competence is optimal mould design and on-time delivery.

If you’re still looking for the good double cream packing jar caps mold maker in China, we can be your another good choice.

Lucia

lucia@yueyimold.com