YUEYI Mold, China experienced 2k mold maker, quality offer air inlet damper dual mold, bi injection control actuator heater blend, multi material AC blend mix flap mold, co injection heater blend flaps mold.
For many new beginners, they do not have technical skills of multi injection molding. So here we will introduce some tips to judge a good multi component mould.
1. Mould design inspection. There’re many designers they do not have experience of making a mould, so they cannot take everything into consideration. Few days ago, a Turkey customer came to me and told me the mould they presently using has too much cooling time. When our engineer studied their mould drawing, we found that the cooling line did not cool the products. Then our engineer drew a rough drawing to suggest them with new design to shorten the cooling time. This story is telling that a good design really plays a very important role, a good mould design really can reduce the cycle time so to save production cost.
3. Hot runner selection. Multi component mould requires hot runner to make raw material melt and flow faster, so to reduce cycle time. If the hot runner is bad quality, it’s really a very complicated problem during production.
4. Injection molding machine condition. A high speed IMM shall use for fast production. And make sure the mould is cooperating perfect with the machine.
If you’re still looking for the good turntable blend air flap mold maker in China, we can be your another good choice.
Lucia
lucia@yueyimold.com
